主营：东莞音响,东莞专业音响,东莞灯光音响,音响影视工程,惠威音响,多媒体音响,KTV音响,最好的音响,名牌音响,发烧音响,高保真音响,东莞惠威

Inputs 4 Mic/lines with XLR connectors.

Transformer balanced mic inputs.

Transformer balanced line inputs.

High Pass Filters @ 90 & 150 Hz.

12v TA & 48v Phantom, mix powering.

Phase change on channels 2 and 4.

Rotary level control.

6 Position input level selector (5 Mic, 1 Line)

Stereo link facility on both pairs.

Outputs 2 Transformer balanced on 3 pin male XLR connector.

2 Transformer balanced, available on 10 pin Hirose connector.

(In parallel with XLR outputs).

2 Unbalanced outputs on 6 pin Hirose.

Rotary output controls with anti-knock high friction action and with link switch for stereo master.

Switchable between Mic and Line output levels.

Routing Pan controls with low profile knobs and 3 detents: center, full right and full left.

M.S. Facility S switch on Channels 2 and 4 to create A-B recording from M-S microphone.

Matrix position on rotary switch to monitor A-B while recording M-S. Monitoring Direct 10 way rotary switch to select PFL on channels 1-4, left output, right output, stereo output, matrix, sum/M and differences Tape return - last 6 positions on the rotary switch monitor the same functions on the tape return.

Level control - dual ganged pot. 2 outputs 1/4" Type A jack and 3.5mm mini jack.

Auxiliary Inputs Stereo return on Type A jack (unbalanced).

Stereo return 10 pin Hirose connector (balanced).

Return level control and monitoring facility.

Line up Oscillators 1 K Tone into both outputs. 1 K/10K Alternating tone into right output 1 K tone into left output.

Talkback Slate into left and right outputs.

Limiters in both outputs with in/out switch.

Stereo link switch. LED indication of limiter operation. Internal control to vary attack and release time. Threshold internally variable. Metering Send and return signals.

Switch with momentary and constant illumination.

Choice of meter scales, VU, PPM, N10 etc.

Battery Test Biased action toggle switch shows battery status on meter.

Powering External DC input 10-15v on 4 pin XLR.

DC output on 4 pin Hirose.

Internal 9 X 1.5v 'C' cells or 9 X 1.2v Nicads. Separate charge input on pin 2 of XLR. in situ charging of Nicad batteries.

Switched auxiliary DC output on pin 3 of Hirose.

OVERALL GAIN MIC 80, 70, 60, 50, 40dB, LINE 10dB

MAX. INPUT LEVELS MIC -37, -27, -17, -7, +3dB, LINE +20dB

INPUT IMPEDANCE MIC >2k0, LINE >10K

MIC POWER 48v PHANTOM, 12v TONADER

FREQUENCY RESPONSE +0, - 1 dB 20Hz TG 20kHz

HI PASSFILTER -3dB AT 90 Hz & 150 Hz AT 12dB/OCTAVE

HARMONIC DISTORTION <0.03% AT 1 kHz 600R LOAD, 0dB OUTPUT, <0.5% 80Hz TO 20kHz + 15dB OUTPUT

CROSSTALK INTERCHANNEL <70dB 40Hz - 15kHz, GROUP <60dB 40Hz TO 15kHz

MONITORING TYPE 'A' JACK INTO LOW IMPEDANCE PHONES WITH LEVEL CONTROL, MINI JACK INTO HIGH IMPEDANCE PHONES, BBC PPM, NORDIC N10 OR VU METERS

MAXIMUM OUTPUT LEVEL +24dBm

OUTPUT LIMITER THRESHOLD PPM6/+8dB ATTACK TIME 30,uS or 2mS RECOVERY TIME 50mS or 500mS

OUTPUT ATTENUATION 50dB

OUTPUT IMPEDANCE <80R TRANSFORMER BALANCED

NOISE -127dB MIC 20Hz TO 20kHz, 200R SOURCE

POWERING EXTERNAL 10-15v D.C. ON 4 PIN XLR, INTERNAL 9 C SIZE NICADS OR DRYCELLS

CURRENT CONSUMPTION 150mA AT 12v WITHOUT POWERED MICS

DIMENSIONS 290 X 170 X 58mm

WEIGHT 2.5Kg - EXCLUDING BATTERIES