产品分类
最新产品
手机查看产品信息
Audio Developments AD147(现场同期调音台）
The AD147 addition to the 140 series of mixers uses the same ultra low noise circuitry and customized aluminum extrusions that have rightly earned for the range its reputation for clean, crisp audio and reliability.
The AD147 has been developed for discerning engineers who require Audio Developments' build and transparent sound quality allied with the simplicity of its predecessor - PICO.
The AD147 incorporates the M-S facilities that are now much appreciated by Audio Developments' customers. Many recordists are aware of the advantages Blumlein's M-S microphone techniques have over all other microphone techniques - even when recording in the L-R domain.
The AD147 has four mixing busses that enable mixing and/or recording to be performed in the L-R and M-S domains simultaneously. Matrix amplifiers may be switched into the main L-R output and across auxiliary 1 & 2 outputs.
The AD147 takes advantage of the lower noise-floor of modern digital recorders - the limiter slope ratio is a gentle 7:1, thereby reducing distortion and making the artifacts normally associated with limiters much less noticeable or objectionable.
The AD147 presents all its input and output connectors on one surface of the case and in-line with the corresponding module. The connector panel is labeled in order that it may be read from the front of the mixer. The integral carrying handle may also be used to support the mixer at a comfortable working angle.
The AD147 inputs, main and auxiliary outputs are electronically balanced on XLRs with an option of transformer balancing on outputs. Separate connectors are used for microphone and line-level inputs: such is the isolation, both input signals may remain connected at all times. Monitor left, right and headphones together with stereo auxiliary return left and right appear on standard jacks. A 6-pin XLR carries two-way conversation between the mixer and an Outstation - boom operator, director etc.
The AD147 receives its power from 10 x C cells fitted internally - the battery housing adding great strength to the casework. Alternatively, the mixer may be powered from an external 12-15v DC source. Audio
Developments' AD100-015 power supply unit is designed to drive the mixer and, at the same time, charge a set of nickel cadmium batteries -when fitted.
The AD147 possesses features and facilities rarely encountered in a mixer of its type and size: metering of all signal paths; matrix amplifier and balance/width control on monitor circuits; continuous or interrupted
line-up tone; PFL, AFL, SIP...
REFERENCE 0dB = 775mV at 1kHz unless otherwise stated
MAX GAIN MIC 85dB
LINE 50dB
MAX INPUT LEVEL MIC @ MAX GAIN -42dB MIN GAIN 0
LINE @ MAX GAIN -7dB MIN GAIN +30dB
RETURN (STEREO & TB) 24dB
INPUT IMPEDANCE MIC >1k5R
LINE >10kR
RETURN >100kR (STEREO & TB)
MIC POWERING 48V PHANTOM and 12V TONADER
MAX OUTPUT +24dBm (600R LOAD) L/R & AUX 1/2
ELEC. BALANCED
+18dBm (600R LOAD) MONITOR 1/2 & TB SEND UNBALANCED
OUTPUT
IMPEDANCE <60R L/R & AUX 1/2
<20R MONITOR 1/2
<20R TB SEND
FREQUENCY
RESPONSE +0; -1dB 20Hz to 20kHz MAIN SIGNAL &
AUXILIARY PATHS
+0; -1.5dB 20Hz to 20kHz MONITOR PATHS
EQUALISATION 3 BAND
LF; ±10dB @ 100Hz ±15dB MAX @ 30Hz
VARIABLE TURNOVER
MF; ±15dB @ 2k8Hz Q = 1.2 PEAK & DIP RECIPROCAL
HF; ±10dB @ 10kHz ±15dB MAX @ 30kHz
VARIABLE SLOPE
HIGH-PASS FILTER -3dB @ 110Hz 12dB/OCTAVE (REFER TO CURVE)
HARMONIC
DISTORTION <0.03% @ 1kHz 0dBm OUTPUT
<0.15% @ 40Hz to 20kHz +15dBm OUTPUT
OVERLOAD
INDICATOR ILLUMINATES AT +15dB AT THE PRE- FADER POINT
CROSSTALK <-70dB 40Hz to 15kHz INTERCHANNEL & INTERGROUP
NOISE MIC <-126dB EIN 20Hz to 20kHz 200R SOURCE
(WITH RESPECT TO THE INPUT)
LINE <70dB SNR 20Hz to 20kHz
LIMITER THRESHOLD +8dB
RATIO 7 : 1
ATTACK 2 SETTINGS INTERNALLY SWITCHABLE
1 - 4ms; 2 - 0.8ms
RELEASE 2 SETTINGS INTERNALLY SWITCHABLE
1 - 250ms; 2 - 80ms
POSITION 1 IS SET AT FACTORY
POWERING EXTERNAL AD100-015 POWER SUPPLY UNIT
+14V DC, 4-PIN XLR
3W (WITHOUT MICROPHONE POWERING)
手机网站
