• 发布日期：2018-04-17
  分享

How to make the card more standardized

Have done all the printing, in many printed products on the table tour production of the most complex processes up. So what can we do to make our own production of the more standardized it? First of all, our manuscript is to be clear, the manuscript of the printing requirements of the minimum pixel must have 300 pixels, preferably 350 pixels, if all the vector is the best. What is a vector diagram, vector graphics can be infinitely enlarged will not be distorted manuscripts. However, if the elements of the manuscript made by a lot of composition, then it will lead to a large manuscript, so a lot of elements can be used bitmap format, if the draft is too large, then easy to cause the computer can not run, easy to collapse.

Text format must be vector format, so out of the text clear, no matter how small can see, and the color of the text can not be too complicated, the best is the monochrome, so that even a small word can be printed Recognize it.

And then is the table card size set, and card set to meet the requirements of the factory after the production process, because now are using domestic die-cutting, it is inevitable that there is a deviation, to leave enough bleeding, if bleeding If the bit is not enough, it will easily lead to the card content is not centered.

Card production process more, so we have to be made in the early production of predictability, so that cards have enough to set aside the number of anti-risk location. Out of the card to be perfect. In addition to the card design to consider the process, we also take into account because it is more processes, but also need more than ordinary printing products to have more loss.